Mid-Atlantic Irrigation Co., INC
Rubber Ring-Gasket
| Size | Part |
| 2" | 486-20 |
| 3" | 486-30 |
| 4" | 486-40 |
| 5" | 486-50 |
| 6" | 486-60 |
| 7" | 486-70 |
| 8" | 486-80 |
Ring type rubber gasket for use with
K*CS and K*5CS couplings and
irrigation fittings as indicated. One
or more required as per instructions.
(* Indicates diameter)
Aluminum Elbow 90°
| Size | Part |
| 2" | 201-90 |
| 3" | 301-90 |
| 4" | 401-90 |
| 5" | 501-90 |
| 6" | 601-90 |
| 7" | 701-90CS |
| 8" | 801-90CS |
One-piece aluminum construction
2" through 6" sizes. 7" and 8"
require one cuff, and a 1 foot piece
of aluminum tubing the same size
as fitting.
Mathieson Parts
Mathieson Couplers & Cuffs
PIPE RISER SPRINKLER OUTLETS WITH "O" RINGS & BOLTS & NUTS
| Size | Part |
| 1/2" | PR-2 |
| 1" | PR-3 |
Aluminum pipe riser outlets with
steel threaded inserts for use with
Olin K*BN couplings where sprinkler
outlet is required. Optional with
other couplings.
(* Indicates diameter)
| Size | Part |
| 2" | K-2BN |
| 3" | K-3BN |
| 4" | K-4BN |
| 5" | K-5BN |
| 6" | K-6BN |
| 7 | K-7BN |
| 8" | K-8BN |
Clamp on type, die-cast coupling made in two halves requires one sleeve type gasket
Aluminum Reducers
| Size | Part |
| 3"x2" | 301-R2 |
| 4"x3" | 401-R3 |
| 5"x3" | 501-R3 |
| 5"x4" | 501-R4 |
| 6"x4" | 601-R4 |
| 6"x5" | 601-R5 |
| 7"x6" | 701-R6CS |
| 8"x7" | 801-R7CS |
One piece aluminum construction
through 6", 7" and 8" require one
cuff, and a 1 ft. piece of tubing the
same size as fitting.
Rubber Sleeve-Gasket
| Size | Part |
| 2" | 487-20 |
| 3" | 487-30 |
| 4" | 487-40 |
| 5" | 487-50 |
| 6" | 487-60 |
| 7" | 487-70 |
| 8" | 487-80 |
Rubber sleeve-gasket for use
with aluminum couplet (die-cast)
K-2BN through K-8BN.
Aluminum Elbow 45°
| Size | Part |
| 3" | 301-45 |
| 4" | 401-45 |
| 5" | 501-45 |
| 6" | 601-45 |
| 7" | 701-45CS |
| 8" | 801-45CS |
One-piece aluminum construction
3" through 6" sizes. 7" and 8"
require one cuff, and a 1 foot piece
of aluminum tubing the same size
as fitting.
| Size | Part |
| 2" | C-2BN |
| 3" | C-3BN |
| 4" | C-4BN |
| 5" | C-5BN |
| 6" | C-6BN |
| 7 | C-7BN |
| 8" | C-8BN |
Used on male end of pipe with both
K*BN and K*CS and 7" & 8" fittings.
(* Indicates diameter)
In-Line Tees
| Size | Part |
| 2" | 201-T2 |
| 3" | 301-T3 |
| 4" | 401-T4 |
| 5" | 501-T5 |
| 6" | 601-T6 |
| 7" | 701-T7CS |
| 8" | 801-T8CS |
One-piece aluminum construction
3" through 6" sizes. 7" and 8"
require one cuff, and a 1 foot piece
of aluminum tubing the same size
as fitting.
END-CAPS
| Size | Part |
| 2" | 20-1/2 |
| 3" | 30-1/2 |
| 4" | 40-1/2 |
| 5" | 50-1/2 |
| 6" | 60-1/2 |
| 7 | 70-1/2 |
| 8" | 80-1/2 |
One-piece aluminum construction